Portland-State-University 2015-2016 Bulletin

Environmental Engineering B.S.(BSENVE)

The BSENVE program provides training for engineers to preserve the natural environment – an especially important part of our culture in Portland and in the state of Oregon. Oregon prides itself on its environmental commitments and efforts toward living sustainably. This degree focuses on the fundamentals of environmental and water resources engineering with recommended tracks in geo-environmental, surface water hydrology and remote sensing, surface and groundwater water quality, groundwater hydrology, or air quality. Many of the required courses in the program are interdisciplinary drawing from the Departments of Chemistry, Mathematics and Statistics, Environmental Science and Management, Physics, Geology and Biology.

The BSENVE curriculum at Portland State University is accredited by the Engineering Accreditation Commission of ABET, 415 North Charles Street, Baltimore, MD 21201 – telephone: 410-347-7700. This national organization sets standards for curricular content, quality of faculty, and adequacy of facilities

BSENVE Program Educational Objectives

Educational objectives describe the “career and professional accomplishments that the program is preparing graduates to achieve” (ABET, 2010) within a few years of their graduation.

The educational objectives of the Environmental Engineering program at Portland State University are as follows:

Graduates are expected to practice environmental engineering responsibly and ethically by (1) working effectively in the professional engineering community and (2) continuing to learn and enhance their abilities in environmental engineering.

BSENVE Program Outcomes

Program outcomes are goals that describe our expectations as BSENVE students graduate. Graduates of the Environmental Engineering program will have the skills and abilities to prepare them to begin professional practice or to succeed in graduate studies.

Graduates will have:

(A) An ability to apply principles of mathematics, science, and engineering to the analysis and design of environmental engineering projects.

(B) An ability to design and conduct experiments, as well as to analyze and interpret data.

(C) An ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability and sustainability.

(D) An ability to participate in projects that cross disciplines and to function on multi-disciplinary teams.

(E) An ability to identify, formulate, and solve engineering problems.

(F) An understanding of the professional and ethical responsibility of engineers in a broad societal context.

(G) An ability to communicate effectively.

(H) The broad education necessary to understand the impact of engineering solutions in a global, economic, environmental and societal context.

(I) A recognition of the need for, and an ability to engage in continuing professional development and life-long learning.

(J) Knowledge of relevant contemporary issues.

(K) An ability to use the modern techniques, skills, and engineering tools necessary for engineering practice.

(L) An awareness of the need for professional registration in career development.

Requirements

BSENVE majors must complete the following University and department degree requirements for their upper division engineering coursework.

  1. Junior and senior engineering courses must be completed with a minimum grade of C-:
  2. Prerequisite courses must be passed with a grade of C- or better in order to move ahead in the sequence;
  3. The student’s cumulative PSU GPA must be 2.33 or higher to graduate from the BSENVE program;
  4. Any deviation from the required courses including engineering and mathematics substitutions must be approved in writing by the Department Chair.

Transfer students should follow the requirements as listed under the "Eligibility - BSENVE" section above.

Freshman Year

CE 111Introduction to Civil and Environmental Engineering

3

CE 112Civil and Environmental Engineering Computations

3

CE 115Civil Engineering Drawing and Spatial Analysis

3

Ch 221General Chemistry I

4

Ch 222General Chemistry II

4

Ch 227General Chemistry Laboratory

1

Ch 228General Chemistry Laboratory

1

Mth 251Calculus I

4

Mth 252Calculus II

4

Mth 261Introduction to Linear Algebra

4

Bi 234Elementary Microbiology

4

Bi 235Microbiology Laboratory

2

Freshman Inquiry

15

Total Credit Hours:52

Sophomore Year

EAS 211Statics

4

EAS 212Strength of Materials

4

EAS 215Dynamics

4

Mth 254Calculus IV

4

Mth 256Applied Differential Equations I

4

Ph 221General Physics (with Calculus)

3

Ph 222General Physics (with Calculus)

3

Ph 223General Physics (with Calculus)

3

Ph 214Lab for Ph 201 or Ph 211 or Ph 221

1

Ph 215Lab for Ph 202 or Ph 212 or Ph 222

1

Ph 216Lab for Ph 203 or Ph 213 or Ph 223

1

Sophomore Inquiry

12

Total Credit Hours:44

Junior Year

ESM 320Analysis of Environmental Systems I

4

ESM 321Analysis of Environmental Systems II

4

ESM 322Environmental Risk Assessment

4

ESM 323Environmental Systems Laboratory I

2

ESM 324Environmental Systems Laboratory II

2

ESM 325Environmental Risk Assessment Lab

2

ME 321Engineering Thermodynamics I

4

CE 315The Civil and Environmental Engineering Profession

1

CE 345Environmental Soil Mechanics

2

CE 361Fluid Mechanics

4

CE 362Engineering Hydraulics

4

CE 364Water Resources Engineering

4

CE 371Environmental Engineering

4

G 301Geology for Engineers

3

Stat 451Applied Statistics for Engineers and Scientists I

4

Total Credit Hours:48

Senior Year

CE 474Unit Operations of Environmental Engineering

4

CE 480Chemistry of Environmental Toxins

4

CE 484Civil Engineering Project Management and Design I

3

CE 494Civil Engineering Project Management and Design II

3

Ec 314Private and Public Investment Analysis

4

Upper-division cluster

8

Approved Environmental Engineering Electives

18

Total Credit Hours:44

Ec 314 is a required course that can be taken as a part of some upper-division clusters.

Electives: see below.

Approved Environmental Engineering Electives:

There are approved tracks in geo-environmental engineering, surface water quality, surface hydrology and hydraulics, subsurface hydrology and contaminant transport, or air quality (students are not restricted to these tracks and may select electives in any combination). BSENVE Students are also allowed to take one of the following courses for elective credit: G 424, Geog 488, or Geog 492. Additional elective classes outside of the CE subject area require prior approval from the Department Chair.

1. Geoenvironmental:

CE 445Geo-environmental Engineering with Geosynthetics

2

2. Subsurface hydrology and contaminant transport:

CE 469Subsurface Hydrology

4

CE 479/ESM 479Fate and Transport of Toxics in the Environment

4

CE 571Subsurface Contaminant Transport

4

3. Surface water hydrology:

CE 464Hydrologic and Hydraulic Modeling

4

CE 467Hydrologic and Hydraulic Design

4

CE 565Watershed Hydrology

4

4. Surface water hydrodynamics and water quality

CE 479/ESM 479Fate and Transport of Toxics in the Environment

4

CE 481The Columbia River as a System

2

CE 482Introduction to Sediment Transport

4

CE 483Estuarine Circulation

4

CE 572Environmental Fluid Mechanical Transport

4

CE 576Environmental Fluid Mechanics

4

CE 578Water Quality Modeling

4

5. Air quality:

CE 488/ESM 460Air Quality

4

Ph 375Climate Change and Human Life

4

Ph 471/ESM 471Atmospheric Physics

4

Ph 477Air Pollution

4

Total Credit Hours: 188